EasyPSV Removable

EasyPSV® Removable – Pressure Sensitive Vinyl

Stick it, Switch it, Smile!

Create worry-free décor that can be changed repeatedly using EasyPSV® Removable by Siser®. This temporary pressure sensitive vinyl takes the guesswork out of decorating. You don’t have to wonder if the adhesive vinyl will leave a gluey mess behind, or even worse, take some of the wall with it! EasyPSV Removable comes off cleanly and quickly without any special tools or solvents for care free customizing!

While EasyPSV Removable lasts 2-3 years, you can choose to change it up at any time, and with a stylish matte finish who wouldn’t? Plus EasyPSV Removable even includes Chalkboard! Use this black, textured vinyl to turn any hard surface into a writable chalkboard that’s compatible with soft chalk, standard chalk, and chalk ink markers. But the best part is, you can layer EasyPSV Permanent on top of EasyPSV Removable for temporary decals that have virtually endless color and finish combinations! Here’s a cool blog post to check out on applying EasyPSV Removable to a painted wood sign.

EasyPSV Removable White Cloud   EasyPSV Removable Silver Dollar   EasyPSV Removable Graphite   EasyPSV Removable Charcoal   EasyPSV Removable Black Cat   EasyPSV Removable Ketchup   EasyPSV Removable Orange Soda   EasyPSV Removable Salmon   EasyPSV Removable Chocolate Bar   EasyPSV Removable Golden
EasyPSV Removable School Bus   EasyPSV Removable Canary Yellow   EasyPSV Removable Pistachio   EasyPSV Removable Green Tea   EasyPSV Removable Tree Frog   EasyPSV Removable Emerald   EasyPSV Removable Fresh Mint   EasyPSV Removable Totally Teal   EasyPSV Removable Surf Blue   EasyPSV Removable Steel Blue
EasyPSV Removable Nautical Blue   EasyPSV Removable Twilight Navy   EasyPSV Removable Royal Purple   EasyPSV Removable Logan Berry   EasyPSV Removable Carnation Pink   EasyPSV Removable Vintage Plum   EasyPSV Removable Chalkboard      

EasyPSV Removable applies to:

Painted Drywall Glass / mirror Wood Plastic Metal Ceramic
Painted Drywall Glass / Mirror Wood Plastic Metal Ceramic

Craft Cutter Settings

Blade: Standard    Setting: Vinyl

    Silhouette Cameo:    
Standard, 2    Material: Vinyl, Glossy    Speed:     Force:  8

    Brother ScanNCut:    
Standard, 3    Cut Speed: 1    Cut Pressure: 1

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Pro Cutter Settings

    Roland GX/GS-24:
Blade: 45°    Gram Force: 80-110    Offset: .250    Speed: 50 cm/s

45°    Force: 9    Tool: CB09+0    Speed: 50 cm/s

    MH, SC2, LP3, and Titan 1:    
45°/60°    Gram Force: 55-60    Speed: 180 mm/s *Blade Advancing Varies

    Titan 2 & 3:    
45°/60°    Gram Force: 50-55    Speed:  180 mm/s *Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Application Instructions

• Place EasyPSV® with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
• Weed excess vinyl.
• Remove the application tape’s paper liner and place tape on top of EasyPSV.
• Burnish with a squeegee.
• Lift the application tape and EasyPSV away from the paper liner.
• Place the application tape on your desired object.
• Burnish with a squeegee to fully adhere the design.
• Gently peel away the application tape, leaving just your EasyPSV design on the object.

Click here for full EasyPSV® Removable application instructions

Recommended Accessories: Siser Weeder, Siser Squeegee, EasyPSV Application Tape

Care Instructions: Can be used on painted drywall. Not recommended for use near flame / heat source. Not microwave or dishwasher safe.