EasyPatterns


EasyPatterns® Plus - Heat Transfer Vinyl

Pre-Masked Patterns that are Easier to Use!

EasyPatterns® Plus are the wow factor you're looking for! These pre-printed, pre-masked patterns eliminate the need for layering multiple solid colors, therefore eliminating extra weight on the garment! Available in styles ranging from classic to cool, there’s bound to be a pattern that's perfect for your next project. EasyPatterns  Plus were designed to fit into a variety of vinyl cutters as easily as they fit into a variety of niches and trends. Simply cut your design like our other HTV materials, and weed away the excess material from the built-in carrier. Mix and match EasyPatterns Plus with other types of Siser HTV for extraordinary styles. Just be sure to keep EasyPatterns Plus as the top layer for best results. With a semi-gloss finish and soft hand, EasyPatterns Plus are the star of the show even when applied with a home iron!

EasyPatterns Plus is 80 Microns / 3.1 Mils and is a PU composition.


EasyPatterns Plus features

EasyPatterns Decorated Shirt
EasyPatterns Bohemian Stripes   EasyPatterns Buffalo Plaid Red   EasyPatterns Camo Green   EasyPatterns Camo Pink   EasyPatterns Infinite Galaxy   EasyPatterns Jambo   EasyPatterns Jubilee   EasyPatterns Kente   EasyPatterns Kusonga   EasyPatterns Leopard Tan
 
EasyPatterns Mermaid Scales   EasyPatterns Paisley Party   EasyPatterns Serape   EasyPatterns Sunset Gradient   EasyPatterns Tropical Leaves   EasyPatterns Vintage Rose   EasyPatterns Watercolor Rainbow            

EasyPatterns Plus are Currently Only Available in Retail Stores

EasyPatterns Plus apply to:


100% Cotton 100% Polyester Poly/Cotton Blends Leather
100% Cotton 100% Polyester Poly/Cotton Blends Leather



Settings for Craft and Professional Cutters


Cricut® Explore Air

 

Cricut® Maker

 

Brother® Scan N Cut DX

 

Silhouette Cameo® 4

     
Blade: AutoBlade, Standard
Setting: Iron On
 
Blade: AutoBlade, Fine-Point 
Setting: Heat Transfer, (Non-Cricut)
 
Blade: AutoBlade
Cut Speed: 5   Half Cut:Auto
 
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6    Speed: 8

Roland® GX/GS-24

 

Graphtec®

 

US Cutter® Titan 2 & 3

 

Mimaki® CG-60SR III

     
Blade: 45°
Gram Force: 80-90
Offset: .250   Speed: 30-50 cm/s
 
Blade: 45°
Gram Force: 8-9
Tool: CBO9U+0   Speed: 30 cm/s
 
Blade: 45/60°
Gram Force: 60-65
Speed: 300 mm/s * Blade Advancing Varies
 
Blade: 45°
Gram Force: 90
Offset: 30   Speed: 20-30 cm/s

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Don't see your cutter listed? Click here to download a .pdf of various other cutters.



Application Instructions


Home Iron Instructions

• Mirror design and cut according to your cutter's settings 
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
for 15 seconds
• If areas of design lift after application, replace cover sheet and
re-press for 10 seconds
• Peel carrier hot cold

Heat Press Instructions     

• Mirror design and cut according to your cutter's settings
• Weed excess material   
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C (EasyPress® users add approx. 30°)
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Click here for a printable version of all HTV application instructions



Recommended Accessories: Siser Weeder,   Multipurpose Paper or Heat Transfer Cover Sheet 

Laundering: Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
Liquid fabric softener not recommended.